Honeywell CK65 Series Quick Start Guide

15
Scan a Barcode with the Scan Demo
Note: For optimum performance, avoid reflections by scanning the
barcode at a slight angle.
1. Swipe up from the bottom of the Home screen to access all
apps.
2. Touch Demos > Scan Demo.
3. Point the computer at the barcode.
4. Touch Scan on the touch screen or press and hold any Scan
button. Center the aiming beam over the barcode.
The decode results appear on the screen.
Note: In the Scan Demo app, not all barcode symbologies are enabled by
default. If a barcode does not scan, the correct symbology may not
be enabled. To learn how to modify the default app settings, see
the user guide.

Honeywell CK65 Series Specifications

General

Processor	2.2 GHz Qualcomm Snapdragon 660 octa-core
Memory	4 GB RAM, 32 GB Flash
Battery	7, 000 mAh
Connectivity	Wi-Fi 802.11 a/b/g/n/ac, Bluetooth 5.0, NFC
Camera	13 MP rear camera
Durability	IP65 rated
Touch Panel	Capacitive multi-touch
Keypad	numeric keypad
Scanning	Honeywell N6703 2D imager
Operating Temperature	-20°C to 50°C (-4°F to 122°F)
Drop Specification	Withstands drops to concrete per MIL-STD 810G
Display	4.0 in WVGA (480 x 800) bright color LCD with backlight, outdoor viewable