2
Memory Card Specifications
Honeywell recommends the use of Single Level Cell (SLC)
industrial grade microSD™ or microSDHC™ memory cards with
mobile computers for maximum performance and durability.
Contact a Honeywell sales representative for additional
information on qualified memory card options.
Equipment for Use in Hazardous Locations
Routine operator inspections should occur to check for possible
device damage before using the mobile computer in areas
known to be hazardous.
Caution: Improper battery replacement or incompatible
device usage may result in risk of burns, fire, explosion, or
other hazard. Dispose of batteries according to local
regulations.
Mesee en garde: Le remplacement incorrect de la pile ou
l’usage d’un appareil non compatible peut représenter des
risques de brûlures, d’incendie, d’explosion ou d’autres
dangers. Éliminez les piles lithium-ion usagées
conformément aux réglementations locales.
Warning: Explosion Hazard - Batteries must only be changed
or charged in an area known to be non-hazardous.
Use ONLY Honeywell CK65 battery part number
318-063-003 (Li-ion, 3.6 VDC).
Risqued’explosion-Les batteries doivent uniquement être
remplacées ou rechargées dans un endroit non dangereux.
Utilisez UNIQUEMENT Honeywell CK65 batterie
P/N 318-063-003 (Li-ion, 3.6 VDC).
Do not remove the I/O cover in the hazardous area or
attempt to make an I/O connection.
Ne pas retirer le capot E / S dans un environnement
dangereux ni essayer de réaliser une connexion via les E / S
dans un environnement dangereux.
To Next Page
Loading...
Need help?
General
