• PARTY Function
The party function allows you to extend your heating program by a specified
number of hours at a particular temperature before resuming with the normal
temperature program. This is especially useful when you want to maintain or
increase the temperature during a special occasion such as a party or when
entertaining guests.
This function can also be used to reduce the temperature when you leave the
house for a short period (shopping, visiting friends, etc) thus saving energy and
saving you money.
To set the Party function:
a. Move the slider switch to the AUTO or MAN position.
b. Press the button to display the party hours counter and temperature
setting, along with the party indicator .
c. The text ‘PARTY DURATION’ will now be displayed on the screen. Use the
or buttons to set the number of hours (1 - 23 hours).
d. Press the green button to confirm the setting.
e. ‘CHANGES SAVED’ will be displayed for a moment followed by ‘TEMP OK?’
Use the
or buttons to set the desired temperature (5°C - 35°C).
f. Press the green button to confirm the setting. ‘PARTY MODE’ will now be
displayed on the screen until the timer reaches zero or the party mode is
cancelled.
The unit will now control to the new temperature for the set number of hours then
return to normal operation as set by the slider switch position (AUTO or MAN
position). To cancel the PARTY setting or to exit the function at any time press
the button a second time or move the slider switch to a different position.
To Next Page
Loading...
Need help?
General
