Need help?Do you have a question about the Honeywell ControlEdge 900U01-0100 and is the answer not in the manual?
General| Model | 900U01-0100 |
|---|---|
| Series | ControlEdge |
| Type | Controller |
| Input Voltage | 24 VDC |
| Operating Temperature | -40°C to 70°C |
| Enclosure Rating | IP20 |
| Communication Protocols | Ethernet, Modbus, OPC UA |
| Humidity Range | 5% to 95% RH, non-condensing |
Details how to set fixed IP addresses for controller Ethernet ports.
Introduces general programming information using the IEC 61131-3 standard.
Steps to establish a connection with a physical controller or simulator.
Procedure for transferring a compiled project to the controller.
General information and prerequisites for firmware upgrades.
Procedure for upgrading firmware on non-redundant controllers.
Details on-process and off-process firmware upgrades for redundant controllers.
Steps to upgrade the firmware of Expansion Processor Modules.
Instructions for upgrading firmware on ControlEdge 900 I/O modules.
Process for upgrading firmware on serial communication modules.
Steps to upgrade firmware on ControlEdge 2020 expansion I/O modules.
Guides on upgrading wireless firmware for FDAPs and field devices.
Covers configuration of Modbus slave and master roles over TCP and serial.
Steps to set up the controller as a Modbus TCP or Serial Slave.
Procedure to configure the controller as a Modbus TCP Master.
Steps to configure the controller as a Modbus Serial Master.
Details on configuring EtherNet/IP clients, servers, and third-party controllers.
Covers configuration of OPC UA server and client functionalities.
Steps to configure the controller as an OPC UA Server.
Details on configuring the controller as an OPC UA Client.
Procedure to configure the controller as a DNP3 slave device.
Explains HART-IP client and HART Function Block communication.
Steps to configure the controller as a HART-IP Server.
Guides on programming HART Function Blocks for device communication.
Details Control Data Access protocol configuration.
To Next Page