Need help?Do you have a question about the Honeywell ControlEdge 2020 SC-UMIX01 and is the answer not in the manual?
General| Manufacturer | Honeywell |
|---|---|
| Series | ControlEdge |
| Model | SC-UMIX01 |
| Communication | Ethernet |
| Inputs | Universal analog inputs, digital inputs |
| Outputs | Analog Outputs, Digital Outputs |
| Display | Optional LCD Display |
| Power Supply | 24 VDC |
| Operating Temperature | 70°C (-4°F to 158°F) |
| Control Algorithm | PID, On/Off, advanced control options |
Covers installing and launching ControlEdge Builder software.
Guides users through creating and configuring projects in ControlEdge Builder.
Covers setting controller name, IP address, and redundancy.
Details how to configure I/O modules for the controller.
Establishes a connection to the controller using ControlEdge Builder.
Transfers a compiled project from ControlEdge Builder to the controller.
Details the process for upgrading firmware on controllers and modules.
Covers setting up Modbus TCP Master, Slave, and Serial Master.
To Next Page