Building networks
Prerequisites
Ensure that the network is configured in the FDM Server
Management tool.
To build the network
1. From the Network View under Online view, expand FDM Server
network tree. The list of network interfaces appears.
2. Perform any one of the following to build the network.
l Right-click the network interface and then click Build Network.
FDM detects the devices connected to the network and are
displayed in the network view.
l You can also build a network by, right-clicking the target
gateway and then clicking Build Network. FDM detects the
devices connected to the network and are displayed in the
network view.
118
Chapter 7 - Application
To Next Page
Loading...
Need help?
General
