17 69-1199—4
STEP 11. OPERATING YOUR THERMOSTAT
Change Temperature Setting Until the Next Program Period (Temporary Change)
q Press or until the screen shows the desired temperature setting.
NOTE: The temporary temperature setting is displayed for about 3 seconds and then the room temperature is
displayed. Temporary appears in the display. The setting cancels when the next program period starts or
when you press .
Change Temperature Setting Indefinitely (Hold)
q Move the System switch to the desired position (Heat or Cool).
q Press then or to change your setting if desired. (The display changes from showing the setpoint
temperature to room temperature after approximately three seconds).
q To cancel “Hold” press .
Change the Temperature Setting Until a Designated Day and Period (Vacation Hold)
q Press twice.
q Press or until the display shows the desired temperature setpoint.
q Press Time until the desired number of days that you will be away (1 through 255) is displayed.
q Press , , or to select the program period when you want the program to restart.
NOTE: If the Vacation Hold needs to be cancelled before the designated time, press to return to the
program.
Wake
Leave
To Next Page
Loading...
Need help?
General
