Honeywell CT3600 - Step 9. Set the Clock

13 69-1642
To change time format:
❑ Press once.
❑ Press to return to main display.
Factory Set Function (Feature Number 37)
Do not change this setting.
STEP 9. SET THE CLOCK
Set Current Day and Time
NOTE: On initial power-up, the screen flashes 1:00 pm until you press a key.
❑ Press .
❑ Press until screen shows current day.
❑ Press Time or until screen shows current time. (Tapping the will advance the time in one
hour increments).
❑ Press until “DST” displays if daylight savings time is in effect.
❑ Press .
Run
Program
M1334
6
Set Curren
t
Day/Time
Day
Set Curren
t
Day/Time
Daylight
Time
Run
Program