Honeywell D6 PRO - User Manual

D6 PRO Wi-Fi DUCTLESS CONTROLLER
Quick Guide
Warmer Cooler
Display sleep
The controller goes into Display sleep (the screen is dim) after 45 seconds of
inactivity. Press o to wake up the controller. This button push does not change
temperature or settings.
Room temperature
Any time the controller is not being interacted with, the current room temperature
is displayed on screen.
Viewing set temperature
Be sure the controller is not in Display sleep, then press
+
or
-
once to view the
current set temperature. The set temperature will “pulse” on screen. After a short
period of time the screen will change to display the room temperature.
Change temperature
1. Be sure the controller is not in Display sleep, then press
+
or
-
more than once
to change the set temperature so it is higher or lower in the current mode.
2. Stop pressing
+
or
-
when you reach the temperature you want.
3. The screen will pulse and then return to the room temperature display.

Summary

Controller Display and Interaction

Display Sleep

Controller enters dim display after 45 seconds of inactivity. Press to wake.

Room Temperature Display

Shows the current room temperature when the controller is not being interacted with.

Viewing Set Temperature

Press + or - once to view the current set temperature, which will pulse on screen.

Temperature and Mode Control

Change Temperature

Press + or - multiple times to adjust the set temperature to a higher or lower value.

Change Mode

Press to cycle through system modes (Heat, Cool, Off) until the desired mode is selected.

Honeywell D6 PRO Specifications

General

Brand	Honeywell
Model	D6 PRO
Category	Controller
Language	English