Need help?Do you have a question about the Honeywell DC1040 and is the answer not in the manual?
General| Control Type | PID, ON/OFF |
|---|---|
| Display | Dual 4-digit LED |
| Alarm Output | Up to 2 relay outputs |
| Accuracy | ±0.3% of full scale |
| Mounting | Panel mount |
| Input Type | Thermocouple, RTD |
| Output Type | Relay |
| Power Supply | 100-240 VAC |
| Operating Temperature | 0 to 50°C |
| Communication | RS485 Modbus |
Explains how to interpret the DC1000 controller's model number for configuration and wiring.
Explains how to navigate between Operation, Configuration, and Program modes.
Details key functions, changing parameters, and modes within operation.
Explains different control methods like ON/OFF and PID control.
Describes how to set and configure alarm functions and their prompts.
Details the parameters for Configuration 1 mode, including main control settings.
Explains alarm function selections and their configurations.
Introduces error codes and troubleshooting for instrument performance issues.
To Next Page
