Need help?Do you have a question about the Honeywell DC1010 and is the answer not in the manual?
General| Control Type | On/Off, PID |
|---|---|
| Accuracy | ±0.25% of span |
| Operating Temperature | 0 to 50°C |
| Mounting | Panel Mount |
| Input Type | Thermocouple, RTD, mA, V |
| Output Type | Relay |
| Supply Voltage | 100-240 VAC |
| Display | LED |
| Dimensions | 48 x 48 mm |
| Number of Outputs | Up to 3 |
| Enclosure Rating | IP66 |
| Alarm | Up to 2 alarms |
Explains the controller's display, LEDs, and front panel keys.
Details how to navigate between different operational modes like Operation, Configuration, and Program.
Covers key functions, operation mode prompts, and different control types.
Details the first set of configuration parameters for main control functions.
Details the second set of configuration parameters for advanced settings and inputs.
Covers setting up alarm functions, codes, timing, and hysteresis.
Describes security features for controlling mode access and value changes.
Guides the selection and definition of input signal types for sensors.
To Next Page
