3 - 8
15. Close the SIM card latch.
16. Lock the SIM card latch by sliding the latch towards the bottom of the terminal.
17. Install the battery.
18. Install and lock the battery door.
19. Power on the terminal.
Note: It is recommended to format all SD cards before initial use.
Installing a SIM Card
For instructions on installing a SIM card, refer to Installing a SIM Card on page 9-2.
Bottom Panel
I/O Connector
Pin Description
1GND
2 USB_5V_IN
3USB_D-
4USB_D+
5RTS
6UART1_RX
7UART1_TX
8GND
9CTS
To Next Page
Loading...
