3 - 2
Front Panel Features
Scan/Decode LED
The LED lights red when you press the Scan trigger in scanning applications.
The LED lights green when a scanned bar code is successfully decoded.
The LED lights red while the main battery is charging.
The LED lights green when the main battery charging has completed.
The LED lights blue or red during soft and hard resets/
The LED is user-programmable.
Keypad
A 28-key shifted alpha numeric keypad is included on the unit.
Microphone
The integrated microphone can be used for audio recording.
Touch Screen Display
The display is a LCD (Liquid Crystal Display) with a 4-wire analog resistive touch screen. The
2.8” (1/4) VGA (Video Graphic Array) is transmissive active matrix color, backlit, and the
resolution is 240 x 320; see Backlight on page 7-8. The touch panel is a 4-wire analog resistive
touch.
Dolphin 6100s ship with a screen protector already installed over the touch screen lens
to help prevent damage to the touch screen. Do NOT remove this screen protector before
initial use. Honeywell recommends using screen protectors, especially for applications
that require high volume interfacing with the touch screen. For more information, see
Using Screen Protectors on page 3-3. You can purchase additional screen protectors by
contacting your Honeywell sales representative.
LED
Touch Screen
Display (screen
protector
installed at the
factory)
Keypad (28-key
shifted alpha
numeric)
Navigation
keys
Scan key
Power key
Software
Reset key
To Next Page
Loading...
