16 - 7
Bottom Panel
Desk Mounting
The DIN Rail (7.5 X 35 mm) slot on the bottom panel enables secure mounting on a horizontal surface.
Hardware Required
• 3/16 in. dia x 5/8 in. long pan head screw
• 1/2 in. OD x 7/32 in. ID x 3/64 in. thick
• 3/16 in. dia nut
Installing the DIN Rail
1. Slide the DIN Rail into the DIN Rail slot on the bottom panel of the base.
2. Turn the base and DIN Rail right side up.
DIN Rail Slot
Rubber Feet, Qty. 8
Optional Mounting Holes for M3 self
tapping screws, Qty. 4. Maximum
thread depth of 7 mm.
To Next Page
Loading...
