2 - 5
6. Insert the new battery and apply gentle pressure to engage the latch.
Note: Make sure the stylus tether is not caught under the battery during installation.
7. Lock the battery by sliding the latch toward the battery pack.
Note: The terminal does not power ON unless the battery is locked.
8. Reattach the hand strap.
9. Press the Power key or the SCAN key to wake the terminal from Suspend Mode (see page 2-11).
We recommend use of Honeywell Li-ion battery packs. Use of any non-Honeywell battery may result in
damage not covered by the warranty.
Home Screen
After the Dolphin terminal initializes the first time, you see the
Home screen.
Tap to reach the Start screen from the Home screen.
Tap to access the Dolphin Wireless Manager (see page
8-4) from the home screen.
Title Bar
The Title bar, located at the top of the screen, displays the
active program, the status of various system functions, and
the current time. Tapping on the title bar provides access to
the Horizontal Scroll. The scroll provides access to additional
programs and application screens. For additional information,
see Horizontal Scroll on page 2-8.
Icons in the Title Bar
Indicator Meaning
Synchronizing data
The terminal could not synchronize data with the workstation via ActiveSync.
New e-mail
New text message
Text here indicates
the active program.
Icons here indicate the
status of various system
functions.
To Next Page
Loading...
