Need help?Do you have a question about the Honeywell Domonial CMI Series and is the answer not in the manual?
General| Brand | Honeywell |
|---|---|
| Model | Domonial CMI Series |
| Category | Control Panel |
| Language | English |
Overview of main tasks including equipment siting, device registration, programming, and testing.
Step-by-step instructions for removing the cover, marking, drilling, and fixing the panel.
Important warnings regarding panel orientation, battery connection, and drilling.
Instructions for connecting mains power and battery wires to the control panel.
Guidance on connecting PSTN, X10, and remote intercom terminal devices.
Step-by-step guide for registering the TCU keypad with the control panel.
Instructions on entering programming mode, selecting options, and entering codes.
Procedure for mounting wireless devices and registering them with the system via TCU.
Procedure for saving the system configuration and handling the save confirmation.
Testing the status of panel components like battery, tamper, and mains supply.
Checking the status of connected devices and the system's transmission capabilities.
Steps for registering a TAG to arm and disarm the system, meeting EN50131-1 requirements.
Procedure for generating alarm events, disarming the system, and viewing recorded events.
To Next Page