To Next PageTo Next Page
Need help?Do you have a question about the Honeywell DT907 and is the answer not in the manual?
General| Control Mode | On/Off |
|---|---|
| Switching Voltage | 230 V |
| Power Supply | 2 x AA Batteries |
| Compatibility | Heating systems |
| Type | Electronic Room Thermostat |
Details on Honeywell's Dual Tec PIR/Microwave motion sensor series, including commercial models.
Comprehensive feature comparison chart for the Honeywell Dual Tec motion detector family.
Detailed explanation of features for Honeywell's Dual Tec motion sensors, including signal processing and environmental adaptation.
Overview of the IS215T entry-level PIR motion sensor, featuring 40'x40' range and selectable pulse count.
Information on the AURORA Pet Immune PIR motion sensor, offering 35'x45' range and 40 lbs pet immunity.
Details on the IS2535 Selectable Pet Immune PIR Detector with 35'x40' range and selectable pet immunity.
Description of the 995 Recess Mount PIR Motion Sensor, featuring 40'x56' coverage and horizontal/vertical adjustments.
Information on ceiling mount PIR motion sensors, including 360° coverage models like 997 and IS280CM.
Overview of Honeywell's V-Plex PIR motion sensors, leveraging V-Plex polling loop technology for addressability.
Details on the IS310 Request to Exit PIR sensor, featuring adjustable relay time and micro-based signal processing.
Overview of the IS320 Request to Exit PIR sensor, with added features like piezo sounder and door contact input.
Information on the TS300 Dual Temperature Sensor with local and remote probe capabilities and programmable hysteresis.
Details on the 5821 Wireless Temperature Sensor and Flood Detector, offering five selectable temperature ranges.
Overview of the 470-12 Water Sensor for detecting water leaks in various locations, with Form C output.
Information on the 11 Vibration Contact for protecting ceilings, walls, safes and glass with adjustable sensitivity.
Details on the IB100D Dual Photoelectric Beams, offering a 100' range maximum for outdoor use.
Overview of the IB200D Dual Photoelectric Beams, providing a 200' maximum outdoor range.
Information on the IB250S Single Photoelectric Beams, featuring a 250' range maximum for outdoor applications.
Details on Active Infrared Photoelectric Beams, available in single and dual models with ranges up to 250'.
Overview of the FG1625 Glassbreak Detector, featuring FlexCore processing and 25' range.
Details on the FG1625F Flush Mount Glassbreak Detector, designed for single-gang electrical boxes.
Information on the 5853 Wireless Glassbreak Detector, offering set-up and performance identical to the FG1625.
Overview of the FG1625RFM Flush Mount Glassbreak Detector, recess mounting in a 1" diameter hole.
Details on the WAVE2PD Two-Tone Piezo Dynamic Siren, featuring half the weight and current of standard sirens.
Information on the WAVE Speaker, designed for single gang wall plates with a two-position terminal block.
Overview of the WAVE2 Two-Tone Siren, offering a louder 106 dB output and convenient wiring access.
Details on the WAVEF Flush Mount Speaker, allowing installation without disassembly and fitting standard double gang boxes.
Information on the WAVE2F Two-Tone Flush Mount Siren, offering similar performance to Wave 2 with easy installation.
Overview of the 748 Dual Tone Siren, extremely loud (119dB) and mounts directly to walls or electrical boxes.
Details on the 748LC Dual Tone Siren with low current draw (550mA) and dual tone output.
Information on the 749 Speaker/Horn, a versatile device for sounding alarms indoors or outdoors.
Overview of the 5800WAVE Wireless Siren, plugs into receptacles and includes 12-hour battery backup.
Details on the 719 Self-Contained Electronic Siren, a combination speaker and siren driver with weather resistance.
Information on the 735BE Cabinet, which includes a 20-watt speaker and features a tampered cabinet.
Overview of the 744 Multi-Tone Siren Driver, capable of powering multiple speakers and offering 6 jumper-selectable tones.
Details on the AB12M Motorized Bell in Box, required for UL Grade A installations and featuring a low current draw.
Information on the 1011BE12M Motorized Bell in Box, a 10" motorized bell with low current draw and tamper protection.
Details on the 7939WG Magnetic Contact, ideal for residential or commercial use with a standard 1-1/4" gap.
Overview of the 7939-2 Magnetic Contact, featuring SPDT (Form C) contact and a standard 1" gap.
Information on the 7940 Universal Magnetic Contact, offering versatile mounting options and a super wide gap.
Details on the 943WG Mini Magnetic Contact with a standard 1" gap and 12" leads.
Overview of the 945T Miniature Magnetic Contact with screw terminals, featuring a standard 1-1/8" gap.
Information on the PAL-T Magnetic Contact with hinged case cover, concealed screw terminals, and 1-1/8" gap.
Details on the 940 Magnetic Contact, a miniature size perfect for homes and offices with a 3/4" gap.
Overview of the 945 Adhesive Mount Magnetic Contact with 1-1/4" gap and 15 ft. leads.
Details on the PR-20445 Magnetic Contact with leads, featuring adhesive pads for easy installation and a 1-1/4" gap.
Information on the 949 Magnetic Contact with leads, offering screw mount, external test points, and a 1-1/4" gap.
Details on the 951WG 3/8" Press Fit Magnetic Contact, ideal for thin frame applications with a 1-1/4" gap.
Overview of the PRO51BTM 3/8" Stubby Recessed Contact with rare earth magnet and 1/2" gap.
Information on the MPS99WG 3/8" Stubby Contact with Flat Magnet, featuring a 1-1/4" gap and 12" leads.
Details on the MPS95WG 3/8" Stubby Contact with 1/4" magnet, offering a 1-1/4" gap and 12" leads.
Overview of the PR-20421 Press Fit Magnetic Contact, with a 1/4" diameter and 3/4" gap.
Details on the MPS70WG 3/4" Steel Door Contact, featuring a 1-1/4" gap for steel and 12" leads.
Information on the MPS73WG 3/4" Contact with 3/8" Magnet, offering a 1-1/4" gap and 12" leads.
Overview of the 947 1" Steel Door Magnetic Contact with a 1/2" gap in steel and 5' leads.
Details on the 944T 3/8" Magnetic Contact with Screw Terminals, featuring a 3/4" gap and staggered terminals.
Information on the 944TRE 3/8" Magnetic Contact with terminals and rare earth magnet, featuring a 1/2" gap.
Overview of the 944TSP 3/4" Contact with terminals and 3/8" magnet, offering a 3/4" gap.
Details on the 947-75T Steel Door Magnetic Contact with terminals, featuring a 3/4" recess and 1/2" gap.
Information on the 956RPT Mini Roller Plunger Contact with terminals, offering a shorter body for easier recess fit.
Overview of the 955PST Mini Plunger Contact with terminals, featuring a broad face plunger for impact distribution.
Details on the 968XTP XTP High Security Switch, offering defeat resistance and XTP protection up to 2400VDC.
Overview of the 960 XTP Surface Mount Magnetic Contact, the toughest commercial contact with rugged aluminum housing.
Information on the 7945 XTP Surface Mount Magnetic Contact with leads, with 6' cable and immersion proof design.
Details on the MPS80 Surface Mount Contact with terminals, featuring a 2" standard gap and industrial mount.
Overview of the 957 Overhead Door Magnetic Contact, with rugged aluminum housing and a 1" minimum gap.
Information on the 958 Overhead Door Magnetic Contact, featuring adjustable magnet, armored cable, and shock absorber design.
Details on the 959 XTP Overhead Door Contact, exceeding UL transient tests with surges up to 2400 Volts.
Overview of the MPS51C Overhead Door Contact, featuring a 2" standard gap and Form C contact.
Information on the MPS52 Overhead Door Contact, with a 2" standard gap and adjustable magnet.
Details on the 4939SN V-Plex Surface Mount Contact, programmable with serial number addressing.
Overview of the 4945SN V-Plex Surface Mount Contact, featuring mini-surface style with snap-on cover.
Information on the 4944SN V-Plex Recessed Mount Contact, a popular press fit design for 3/8" diameter cases.
Details on the 4191SN V-Plex Recessed Magnetic Contact with built-in RPM, featuring a 1/2" diameter case.
Overview of the 4959SN V-Plex Addressable Overhead Door Contact, with rugged aluminum housing and adjustable magnet.
Details on the 944CE-WH 8mm Recessed Contact with Tamper Loop, featuring 3m leads and standard 25mm gap.
Information on the EMPS-10 8mm Recessed Contact with Tamper Loop, with 30cm lead length and 12mm gap.
Overview of the EMPS-50 Overhead Door Contact with Tamper Loop, featuring 62cm armored cable and tamper loop for security.
Details on the EMPS-70 20mm Diameter Recess Contact with Tamper Loop, complying with EN50131-1 and offering a 20mm gap.
Information on the EMPS-75 20mm Diameter Recessed Contact with terminals, complying with EN50131-1 and having a tamper loop.
Overview of the EMPS-85 Surface Mount Contact with terminals, complying with EN50131-1 and featuring a tamper loop.
Details on the 269R Hold-Up Switch, featuring double-pole double-throw contacts for multi-notifications.
Information on the 270R Hardwired Hold-Up Switch, a plunger type DPDT switch with selectable latching or momentary action.
Overview of the 269SN V-Plex Hold-Up Switch, designed for polling loop only with a stainless steel cover.
Details on the 64 Retractable Slimline Stretch Door Cord, for carrying protective circuits off windows and doors.
Information on the 69 Disconnecting Door Cord, ideal for protecting areas like overhead garage and roll up doors.
Details on the 5192SD/5192SDT Smoke Detector, a low profile V-Plex addressable loop device with automatic maintenance reporting.
Information on the 710 Strobe Warning Lights, providing high intensity flashes for fast premises identification.
Details on the AD12612 Auxiliary Power Supply Battery Charger, providing 6 or 12 VDC and 1.2 Amps output.
Overview of the AD25624 Auxiliary Power Supply/ Battery Charger, providing 12 or 24 VDC and 1-1/2 Amps output.
Components for tamper detection and mounting, including plunger switches, brackets, and pre-wire plugs.
Details on foil contact switches and spacers, used for door and window security applications.
