Honeywell F300 Professional Installation Guide

GETTING
STARTED
Congratulations for selecting the Honeywell Electronic Air Cleaner for your home comfort system! The F300
Electronic Air Cleaner captures and removes a signicant amount of the air-borne particles from the air circulated
through the high-efciency electronic cells. The Electronic Air Cleaner easily mounts in any position within the
return air duct of any gas, oil, and electric forced warm air furnaces and to compressor cooling up to 5 tons.
When Installing this Product...
1. Read these instructions carefully. Failure to follow them could damage the product or cause a hazardous
condition.
2. Check the rating given in the instructions and on the product to make sure the product is suitable for your
application.
3. Installer must be a trained, experienced service technician.
4. After installation is complete, check out product operation as provided in these instructions.
How it Works
Large particles (lint, hair) are caught by the prelter. As the dirty air passes through the intense high voltage
electric eld surrounding the ionizer wires, all particles are given an electrical charge.
The air then moves through the collector part of the cell where alternate parallel plates are charged positively and
negatively, creating a uniform electrostatic eld. The charged particles are attracted to and collect on the plates
that have the opposite electrical charge.
The air then passes through media postlters, removing additional particles from the air stream. The air leaving
the air cleaner has fewer particles. Each time the air circulates through the electronic air cleaner, more particles
are removed.
What to Expect From Your Honeywell Electronic Air Cleaner
F300 Electronic Air Cleaner 68-0240EF—07
2
68-0240EF_B.indd 2 9/14/11 3:04 PM

Honeywell F300 Specifications

General

Type	Electronic Air Cleaner
Voltage	120V
Filter Type	Electronic
Warranty	5 year limited warranty
Collection Cell	Aluminum
Pre-filter	Washable
Wattage	15W