Honeywell Farenhyt IFP-300ECS - Setting the Network ID for each Panel

IFP-300 / IFP-300ECS Manual P/N LS10145-001SK-E:B 12/18/2017 66
5.4 Setting the Network ID for each Panel
The network ID for each panel is set using DIP switch positions 1 through 5. See Figure 5.11 below for possible DIP switch settings.
Figure 5.11 Network ID Settings
NOTE: It is important that much thought is given when choosing the network IDs for each panel. It is difficult to change the IDs once panel
programming has begun