Need help?Do you have a question about the Honeywell Farenhyt IFP-FFT and is the answer not in the manual?
General| Model | IFP-FFT |
|---|---|
| Type | Fire Alarm Control Panel |
| Enclosure Rating | NEMA 1 |
| Notification Appliance Circuits (NACs) | 2 |
| Power Supply | 120/240 VAC, 50/60 Hz |
| Communication | RS-485 |
| Display | LCD |
| Operating Temperature | 0°C to 49°C (32°F to 120°F) |
Emphasizes the importance of smoke detector placement for effective fire detection.
Covers critical safety measures for power disconnection and component handling.
Specifies environmental conditions and wiring best practices for installation.
Instructions for surface and flush mounting the IFP-FFT cabinet.
Procedures for routing wires and installing the main IFP-FFT unit.
Specifies wire type and impedance for audio telephone circuits.
Describes the functions of various keyswitches for system control.
Details the meaning and behavior of system LEDs for status indication.
Step-by-step guide for performing system JumpStart configuration.
To Next Page