EasyManua.ls Logo

Honeywell Fema Moduflex FHBN 1 Series User Manual

Honeywell Fema Moduflex FHBN 1 Series
16 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Montage- und Bedienungsanleitung
Drucktransmitter
Baureihe F
Fitting and Operating Instructions
Pressure Transmitter
Series F
FEMA MODUFLEX
Question and Answer IconNeed help?

Do you have a question about the Honeywell Fema Moduflex FHBN 1 Series and is the answer not in the manual?

Honeywell Fema Moduflex FHBN 1 Series Specifications

General IconGeneral
CategoryTransmitter
ManufacturerHoneywell
Output4-20 mA
Protection RatingIP65
SeriesFHBN 1
Power Supply12 to 30 VDC
ModelModuflex FHBN 1 Series
Accuracy±0.1% of Span

Summary

Technical Data

Safe operation

Safe operation

Advises against disassembling or adjusting calibrated components.

Electrical wiring

Electrical wiring

Details how to connect the power supply and output signals.

Connection diagram

Connection diagram

Illustrates the terminal connections for power and output signals.

Connection to Existing Regulating Systems

Instrumentation for adjustment and testing outside the installation

Instrumentation for adjustment and testing outside the installation

Lists requirements for test equipment for calibration.

Control panel

Control panel

Identifies and explains the function of each control element on the device.

Factory setting

Factory setting

Describes the default configuration and its implications for adjustments.

Changing the working range

Changing the working range

Details the procedure for adjusting pressure ranges and output signals.

Output signal 0–10 V and 0–20 mA Rising pressure = rising output signal

Output signal 10–0 V and 20–0 mA Reversal: rising pressure = falling output signal

Output signal 4–20 mA (2–10 V) Rising pressure = rising output signal

Output signal 20–4 mA (10–2 V) Reversal: rising pressure = falling output signal

Generation of output signal without pressure

Generation of output signal without pressure

Describes how to generate an output signal for testing without applying pressure.

Setting of display module AZ

Related product manuals