Need help?Do you have a question about the Honeywell Fema Moduflex F Series and is the answer not in the manual?
General| Accuracy | ±0.1% of span |
|---|---|
| Operating Temperature | -40 to 85°C (-40 to 185°F) |
| HART Protocol | Yes |
| Output | 4-20 mA HART |
| Measurement Range | Configurable |
| Protection Rating | IP66/NEMA 4X |
| Certifications | ATEX, IECEx |
Allows universal adaptation of end value and slope for adjustable pressure ranges.
Selectable output signal reversal and 0-20mA/4-20mA switching.
Defines rising/falling output and accuracy parameters like linearity.
Explains G1/2 and G1/4 thread connections for pressure transmitters.
Details lateral G1/4 connections for differential pressure transmitters.
Warns against disassembling the sensor or altering calibration.
Instructions for removing and connecting the electronic module.
Illustrates terminal connections for supply voltage and output signals.
Identifies adjustment spindles, potentiometers, and sliding switches.
Step-by-step guide for adjusting pressure range and output signal.
Instructions for using adjustment spindle and potentiometer for setting values.
Procedure for generating output signal for functional checks without pressure.
To Next Page