Return – Set to the time you return home and the temperature you want during the evening, until bedtime.
To adjust program schedules
1. Press SET CLOCK/DAY/SCHEDULE, then SET SCHEDULE.
2. Press or to set your weekday Waketime (Mon–Fri), then press
NEXT.
3. Press or to set the temperature for this time period, then press NEXT.
4. Set time and temperature for the next time period (Leave). Repeat steps 2 and 3 for each weekday time period.
5. Press NEXT to set weekend time periods (Sat-Sun), then press Done to save & exit.
NOTE: Make sure the thermostat is set to the system you want to program (Heat or Cool).
NOTE: You can press CANCEL PERIOD to eliminate unwanted time periods (except Wake).
Program schedule override (temporary)
To Next Page
Loading...
