PID-95P, PID-95
Technical Specifications
CS-2044 | B | 04/19
©2019 Honeywell International Inc.
For a complete listing of all
compliance approvals and
certifications, please visit:
http://www.gamewell-
fci.com/en-US/
documentation/Pages/
Listings.aspx
E3 Series® is a registered
trademark of Honeywell
International Inc.
Microsoft® Windows® is a
registered trademark of
Microsoft® Corporation.
UL® is a registered trademark
of Underwriters Laboratories.
This document is not intended
to be used for installation
purposes. We try to keep our
product information up-to-
date and accurate. We cannot
cover all specific applications
or anticipate all requirements.
All specifications are subject to
change without notice.
Country of origin: U.S.A.
Honeywell Gamewell-FCI
12 Clintonville Road
Northford, CT 06472-1610
203.484.7161
www.gamewell-fci.com
SYSTEM
PID-95P:
Standby Current:
0.0005A, 0.0008A
Alarm Current:
0.0015A
Operating Temperature:
32°F to 120°F (0°C to 49°C)
Relative Humidity:
93%, non-condensing
Dimensions:
4" x 4.688" (10.16 cm x 11.908 cm),
double gang backbox
PID-95:
Standby Current:
0.0005A, 0.0008 A
Alarm Current:
0.0015A
Operating Temperature:
32°F to 120°F (0°C to 49°C)
Relative Humidity:
93%, non-condensing
Dimensions:
4" (10.16 cm) square backbox with blank
cover plate
ENGINEER’S SPECIFICATIONS
Addressable interface devices shall be provided for the
monitoring and supervision of contact type devices
connected to the Fire Alarm Control Panel. The devices
shall monitor a normally-open dry-contact. The
addressable interface devices shall communicate to the
main control panel via the analog addressable circuit. The
interface device shall be Gamewell-FCI PID-95P or PID-
95.
STANDARDS
The PID-95P and PID-95 are designed to comply with the
following standard:
UL STANDARD
UL Standard 864 9th Edition
AGENCY LISTINGS AND APPROVALS
These listings and approvals apply to the modules
specified in this document. In some cases, certain
modules or applications may not be listed by certain
approval agencies, or listing may be in process. Consult
the factory for the latest listing status.
UL Listed:
S521
FM Approved
FDNY Approved
CSFM:
7300-1703:0135
ISO 9001 Certification
To Next Page
Loading...
