To Next PageTo Next Page
Need help?Do you have a question about the Honeywell H3W2GR1 and is the answer not in the manual?
General| Series | Performance Series |
|---|---|
| Maximum Resolution | 1920 x 1080 |
| Resolution | 1080p |
| IR Distance | Up to 30m (98ft) |
| Night Vision | Yes |
| Ingress Protection | IP67 |
| Weather Resistance | Yes |
| Impact Protection | IK10 |
| Wide Dynamic Range (WDR) | 120 dB |
| Two-Way Audio | No |
| Motion Detection | Yes |
| Image Sensor | 1/2.8" Progressive CMOS |
| Lens | 2.8 mm |
| Video Compression | H.264 |
| Operating Temperature | -30°C to 50°C (-22°F to 122°F) |
| Power | 12V DC, PoE |
| Power Source | DC, PoE |
| Connectivity | Ethernet |
| Storage | MicroSD up to 128GB |
Guides through camera mounting bracket assembly, hole preparation, and basic cable connections for installation.
Details on connecting PoE, Micro SD card, and setting video standards (W/PAL, T/NTSC) for camera operation.
Instructions for adjusting camera pan, rotation, and tilt, along with final aiming and LDR sensor setup.
Provides essential safety instructions for handling and operating the camera to prevent damage or injury.
Highlights specific electrical shock risks, radiation hazards, and potential radio interference issues.
Covers FCC compliance, manufacturer declarations, and WEEE disposal guidelines for the device.
Details the process for changing the camera's default password using the IPC Tool software.
Explains how to log in to the camera's interface and access basic system and network settings.
