HA40 4-Channel Controller

HA40 Technical Manual

iii

2.2.1 Setup Configuration Menus ..............................................................................................................................2-3

2.2.2 Channel Setup Entry Menu ...............................................................................................................................2-3

2.2.3 Fault / Alarm 1 / Alarm 2 / Alarm 3 Set-Up Menus ............................................................................................2-4

2.2.4 Configure Menu To Define Channel ..................................................................................................................2-4

Name / Eunits ASCII Data Fields .........................................................................................................................2-5

Input Measurement Range...................................................................................................................................2-5

Decimal Point Resolution .....................................................................................................................................2-5

Turning Off Unused Channels ..............................................................................................................................2-5

2.2.5 Cal Setup Menu ................................................................................................................................................2-6

2.2.6 Calibrate Input Menu .........................................................................................................................................2-6

2�3 System Configuration Menus ��2-7

2.3.1 Standard / Optional Relay Setup Menus ...........................................................................................................2-7

2.3.2 Clock / Delays Menu .........................................................................................................................................2-8

2.3.3 COMM Port Remote ID Menu ...........................................................................................................................2-8

2.3.4 Analog Setup Menu ..........................................................................................................................................2-9

2.3.5 Horn / Acknowledge Menu ................................................................................................................................2-9

2�4 HA40 System Security Menu ��2-10

3 Motherboard Interface PCB

3 Motherboard Interface PCB ��3-2

3�1 Input / Output Optional PCB’s ��3-3

3.1.2 Optional Analog Input PCB ............................................................................................................................3-4

3.1.3 Optional Discrete Relay PCB’s..........................................................................................................................3-4

3.1.4 Optional 4-20mA Analog Output Board ..........................................................................................................3-5

3.2 MODBUS RS-232 / RS-485 Interface Option ......................................................................................................3-6

3.2.1 MODBUS Register And Function Code Summary .........................................................................................3-6

4 Enclosures

4 Enclosures ��4-2

4�1 HA40PCS/HA40SS NEMA Steel Enclosures ��4-2