Honeywell HBW4PR1 User Manual

Configuring Camera Settings
37
SMTP (Email)
Figure 5-16 SMTP Configuration Interface
Table 5-12 SMTP (Email) Configurations
Parameter Function
SMTP Server Enter the server address.
Port The default setting is 25. You can modify this setting as necessary.
Anonymity Supports the anonymity function for the server. You can automatically log
in anonymously. You do not need to enter the user name, password, and
the sender information.
Username Enter the username for the sender’s email
Password Enter the password for the sender’s email
Sender Enter the sender’s email address.
Authentication Enable This is the encryption mode. Select SSL, TLS, or None.
Title Enter the email subject.
Attachment Select the check box to have the system send out a snapshot with the
email.
Mail Receiver Enter the receiver’s email address here. You can enter up to three
addresses.

Honeywell HBW4PR1 Specifications

General

IR Distance	Up to 30 m
Day/Night	IR cut filter with auto switch
IP Rating	IP67
Protection	IK10
Operating Temperature	-30°C to 60°C (-22°F to 140°F)
Resolution	2688 × 1520
Lens	2.8 mm
Video Compression	H.265/H.264
Power	12V DC, PoE (802.3af)
Power Supply	12 VDC
Image Sensor	1/2.8" CMOS
Field of View	Horizontal: 102°, Vertical: 56°