10EN
USE & OPERATION (CONTINUED)
FUNCTION BUTTONS (CONTINUED)
AUTO TURN OFF:
While unit is running, press the
first and then the display will flash. While the display is flashing,
press the + or - button to select the number of hours after which you want the unit to turn OFF
automatically.
AUTO TURN ON:
When the unit is in standby mode, press the button first and then press the + or - button to
select the number of hours until you want the unit to automatically start running.
Note: The time is adjustable between 1 - 24 hours.
TIMER CONTROL
After switching the air conditioner off, you must wait 3 minutes before switching it back on again.
WATER FULL LIGHT
Condensate may accumulate in the unit. If the internal tank becomes full, the Water Full Light
will flash and beep 10 times. The unit will not operate until the tank has been drained (refer to the
"Water Condensate Drainage" section)
WI-FI MODE^
When the Smart Portable
Local Air Conditioner is connected to the wifi function, the indicator
light will be illuminated.
^THIS IS ONLY FOR MODEL HC09CESVWK
To Next Page
Loading...
Need help?
General
