EasyManuals Logo

Honeywell HC09CESAWK User Manual

Honeywell HC09CESAWK
198 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #23 background imageLoading...
Page #23 background image
15
TROUBLESHOOTING GUIDE
EN
The following troubleshooting guide addresses the most common problems. If problems persist, call
Customer Support. Unplug and disconnect the appliance from the power source before attempting
to troubleshoot.
PROBLEM POSSIBLE CAUSE SOLUTION
Unit does not
start
No electricity. Check for power.
Batteries in the Remote
Control need to be
replaced.
Change Remote Control batteries.
The power cord is not
properly plugged in.
Remove and reconnect the power cord.
Unit runs a
short while only
The thermostat
temperature setting
is too close to room
temperature.
Lower the set temperature.
Air outlet is blocked.
Make sure the exhaust hose is properly connected
and check there are no objects blocking the air outlet.
There are tight bends in
the air Exhaust Hose.
Connect Exhaust Hose as per instructions on Page 3.
Unit runs but is
not cooling
A door or window is open. Make sure the window or door is closed.
The Dust Filter is dirty. Clean the Dust Filter.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Honeywell HC09CESAWK and is the answer not in the manual?

Honeywell HC09CESAWK Specifications

General IconGeneral
BrandHoneywell
ModelHC09CESAWK
CategoryAir Conditioner
LanguageEnglish

Related product manuals