16EN
TROUBLESHOOTING GUIDE (CONTINUED)
PROBLEM POSSIBLE CAUSE SOLUTION
Unit runs but is
not cooling
The Hose is detached.
Reinstall Hose properly
(refer to Installation section).
Temperature setting is
too high.
Reduce temperature setting on control panel.
Air outlet or intake is
blocked.
Remove blockage.
Room exceeds
recommended size.
Move unit to smaller room.
Large size or number of
windows are decreasing
cooling effectiveness.
Cover windows with curtains or blinds.
Unit will not
run and Power
button is
blinking
(water full
indicator)
Excess water condensate
inside
the Tank.
Drain the water (refer to Water Condensation
Drainage).
To Next Page
Loading...
Need help?
General
