47
Honeywell 35 Series IP Cameras User Guide
8 CONFIGURE STORAGE SETTINGS
SD Card Management
Go to Setup > Storage Setup > SD Card Management.
This section describes how to manage the local storage on the camera. Here you can
view SD card status, and implement SD card control.
See the following table for compatible SD Card.
Table 4 Compatible SD Card
microSDHC A1 C10 16 GB
microSDHC V10 16 GB
SanDisk
microSDHC V30 32 GB
SanDisk
microSDXC V30 128 GB
Toshiba
microSDXC M303 V30 128 GB
Micron
microSDXC A2 C10 128 GB
•
It is recommended to turn OFF the recording activity before you remove an SD card
from the camera.
The lifespan of an SD card is limited. Regular replacement of the SD card can be
necessary.
Camera file system takes up several megabytes of memory space. The storage
space cannot be used for recording.
Using an SD card that already contains da
ta recorded by another device should not
be used in this camera.
Do not modify or change the folder names in the SD card. That may result in
camera malfunctions.
If you want to use the SD card in another camera, format the SD card in another
camera first. For how to format the SD card, see
SD Card Format
on page
48
.
To Next Page
Loading...
Need help?
General
