Performance Series Network Video Recorder User Guide
108
Figure 9-4 HDD Manager Window
Name: The HDD name.
Physical Position: Indicates which hard drive slot the HDD currently occupies.
Type: The HDD type (read-write or read-only).
HDD Group: The HDD group that the hard drive belongs to.
Status: The current operating status of the HDD.
Free Space/ Total Space: The amount of free space remaining on the HDD/ The total
capacity of the HDD.
2. The HDD is configured as read-write by default. To change the HDD type to read-only, in
the Type column, select Read-only HDD.
Note The NVR restarts to apply the new setting.
3. To erase all the data from a HDD, select it and click Format. A confirmation message
appears: "Confirm format on the selected device?" Click OK to continue.
Configuring FTP Settings
You can configure an FTP connection to upload image files at regular intervals to an FTP
server.
1. Go to Main Menu SETTING STORAGE FTP.
To Next Page
Loading...