Performance Series Network Video Recorder User Guide
104
9 Configuring Storage Settings
This chapter contains the following sections:
• Configuring the Basic Settings on page 104.
• Configuring the Recording Schedule on page 105.
• Configuring HDD Manager Settings on page 107.
• Configuring FTP Settings on page 108.
• Configuring HDD Advanced Settings on page 110.
• Configuring NAS Storage on page 111.
• Configuring NAS Manager on page 112.
• Configuring Record Settings on page 112.
• Configuring HDD Detect Settings on page 113.
Configuring the Basic Settings
Go to Main Menu SETTING STORAGE BASIC.
Figure 9-1 Storage Basic Configuration Tab
HDD Full: Set to Overwrite to continue recording over old data when the HDD is full. Set to
Stop Record to stop recording when the HDD is full. The default setting is Overwrite.
Pack Duration: Set the recording duration. Specify a time between 1 and 120 minutes. The
default setting is 60 min.
To Next Page
Loading...