Getting Started
25
1. Connect the microphone or the pickup to the audio input port in the PC.
2. Connect the earphone or the sound box to the audio output port on your PC.
3. Open web client and log in.
4. Enable the desired channel in the web client’s live view monitor.
5. See Figure 2-19 for enabling bi-directional communication.
Configuring to Hear Audio from the PC
At the PC end, speak through the microphone or the pickup. Then you can get the audio from
the speaker or earphone from the NVR.
Figure 2-19 Configuring to Hear Audio from the PC
To Next Page
Loading...