Honeywell HEN16162 - Configuring Event Settings; Motion Detection Configuration

800-21090V2 - A - 03/2016
8
Configuring Event Settings 8
This chapter contains the following sections:
• Configuring Motion Detection Settings, page 101
• Configuring Video Loss Settings, page 106
• Configuring Video Masking (Tampering) Settings, page 107
• Configuring System Event Settings, page 108
• Configuring Alarm Input Settings, page 110
• Configuring Alarm Outputs, page 116
Configuring Motion Detection Settings
To set up motion detection regions
1. Go to Main Menu > SETTING > EVENT > DETECT > Motion Detect.