Configuring System Settings | 139
800-21090V2 - A - 03/2016
Exporting and Importing System Configurations
You can export and/or import NVR system configurations if you are installing several NVRs
requiring the same setup.
To export a system configuration
1. Go to Main Menu > SETTING > SYSTEM > CONFIG BACKUP.
2. Insert a USB storage device (such as a USB flash drive) into one of the USB ports on the
NVR. The Find USB device dialog box opens.
Figure 10-13 Find USB Device Window
3. In the Find USB device dialog box, click Config Backup.
4. On the CONFIG BACKUP page, click Refresh. The page populates with the details of the
storage device.
Figure 10-14 Configuration Backup Window
To Next Page
Loading...
