7
USE & OPERATION
CONTROL PANEL
FUNCTION BUTTONS
1) Power Control 4) Timer / Temperature Set Controls 7) Water Full Light
2) Swing Control 5) Mode Control
3) Fan Speed Control 6) Timer Control
EN
(3)(4)(5)(6) (1)
(7)
(2)
*Applicable for models with Heating feature only.
The Power Control turns the unit on and off
.
Usage humidity range: 30% - 80% RH.
POWER CONTROL
SWING CONTROL
Press the
button on control panel to activate automatic oscillation of louvers. Press the button
again to stop the swing when louvers have reached your desired angle.
Note: In order to avoid damaging the internal mechanisms, the louvers must not be moved manually.
Note: After switching the air conditioner off, you must wait 3 minutes before switching it back on.
4 settings: Auto , Low , Medium , and High .
Auto Fan
Press the + or - button to select the temperature you want. Press the Mode button to select
cooling or heating mode. After you press fan button
and select Auto Fan , the unit will
automatically run its fan speed depending on the temperature difference between the set & room
temperature.
Note: Auto: This function can be selected under cooling or heating mode only.
FAN SPEED CONTROL
To Next Page
Loading...
Need help?
General
