Fan Operation Mode
1. Press the “MODE” button, select the fan operation mode.
2. By pressing the “SPEED” button, you can select the fan speed from LOW, MID,
HIGH.
3. Press the “ON/OFF” button, the air conditioner starts to operate.
4. Press the “ON/OFF” button again, the air conditioner stops.
NOTE: In the fan operation mode, the temperature settings is non-effective.
Drying Operation Mode
1. Press the “MODE” button, select the drying operation mode.
2. By pressing the “
˄” or “˅” button, you can set the temperature, the display
changes as you touch the button.
3. By pressing the “SPEED” button, you can select the fan speed from LOW, MID,
HIGH, AUTO.
4. Press the “ON/OFF” button, the air conditioner starts to operate.
5. Press the “ON/OFF” button again, the air conditioner stops.
Backlight Function
• The remote controller has a backlight which can be turned on by pressing any
button for the convenience of operation in darkness. The backlight will be
automatically turned off if there is no operation within 10 seconds.
AIR CONDITIONER OPERATION
25
To Next Page
Loading...
Need help?
General
