IHR810 User Manual
www.impactbyhoneywell.com
22.
Method 1 Method 2
2. After the first step, install the Virtual Com driver to the printer; firstly go to the Device Manager and find the unknown
device with a question mark, click the right key to select Red box 2 under the option “Update Driver Software…”,
as shown below:
3. Click “Browse”, you can browse the folder that contains drivers, as shown below:
II. Take the WIN 10 system as an example, the installation instruction of NXP chip program should be operated as follows:
1. Send instructions by modifying tools of the printer or directly click Switch button, provided that the on-line testing of the
printer and the computer is normal.
1
2
To Next Page
Loading...
