Honeywell IMPACT IHR810 - Chapter 6: Add IP Port for Network Interface

Chapter 6
Add IP Port When Using Network Interface Machine.
IHR810 User Manual
www.impactbyhoneywell.com
17.
When finishing the installation of the printer’s driver, it demands to add an IP Port to the Driver when using Network
Interface machines. Take WIN 10 operating system for an example. The specific operations are as follows:
1. Find the icon of the driver that has already been installed. Right click the “Printer Properties”. See the following picture.
2. Click “Ports”, and choose “Add Port” option. See the following picture.
3. Choose “Standard TCP/IP Port”, then click “New Port”. See the following picture.