Honeywell IMPACT IHR810 - Page 30

IHR810 User Manual
www.impactbyhoneywell.com
28 .
3. Click the “Bluetooth Set”, and follow the steps to set up the Bluetooth information. See the following pictures:
1
2
3
(1) Set up the Port name of the Bluetooth Printer (The Factory Default BT NAME is “IHR810BT”)
(2) Set up the Password of the Bluetooth Printer (The Factory Default BT PINKEY is “0000”)
(3) After doing the above settings, click “Setting”, and then finished the settings of Bluetooth printer Parameters.