IHR810 User Manual
www.impactbyhoneywell.com
44.
“Net Monitor”----Monitor printer status through network. (net port available)
6. Number of the copies:
It refers to the printing quantity of the repeat print of the test content.
7. HEX：
Data can only be transmitted by inputting hexadecimal after having selected printing content. (It’s mainly used to send
instructions to the printer).
8. Printing content:
Edit the printing content here, and send data by clicking "Print" button.
9. Automatically sending, cycle, paper cutting:
“Automatically sending”----- Click the "Auto Send" button and the software will automaticallysendthe data in the printing
content column to the printer. “Cycle”------ cycle time to send data auto matically “Paper cutting”----- Printer will
automatically do paper cutting work according to the cycle time after the “Auto Send " button and “cyc” button have been set.
10. Print:
Print the information and data in the “content”edit box.
11. Paper cutting:
Test the function of paper cutting action.
12. Open cash drawer：
Test the cashbox function.
13. Driver print:
Call the installed Windows driver to test print, printing out the information suggests successful installation.
14. Advanced:
Click "advanced" button, and set up more features to have print test, below is the detailed introduction.
To Next Page
Loading...
