N
KRA 405B RADAR ALTIMETER INSTALLATION MANUAL
Page 2-3
006-10536-0010 Rev. 10 Oct/2005
Use the cursor keys or the mouse to move the highlight bar to the
parameter that is to be adjusted.
FIGURE 2-1 KRA 405B DEFAULT TRIP POINT SETTINGS
Press the <Enter> key to display the Editing Window for the selected
Trip Point. The window should be similar to the following figure.
FIGURE 2-2 KRA 405B TRIP POINT EDITING WINDOW
Enter an integer value between 0 and 2500 at the blinking cursor.
Press the <Enter key> to accept the value.
To Next Page
Loading...
