Need help?Do you have a question about the Honeywell Bendix/King KN 63 and is the answer not in the manual?
General| Category | Measuring Instruments |
|---|---|
| Type | DME (Distance Measuring Equipment) |
| Channels | 200 |
| Display | Digital |
| Operating Temperature | -20°C to +55°C |
| Frequency Range | 962-1213 MHz |
| Accuracy | ±0.1 nautical miles |
Manual provides physical, mechanical, and electrical characteristics and installation for KN 63 DME, KDI 572/574, and KDI 573.
Details the KN 63 DME, KDI 572/574 master, and KDI 573 slave indicators, their features, and operation.
Lists specifications including TSO Compliance, Environmental Categories, Channels, and Electrical properties.
Specifies required components for a complete DME installation, including the KN 63 DME, indicators, and antenna.
States that no specific license requirements are mentioned for the equipment in this section.
Information on installation and wiring of KN 63 DME, KDI 572, KDI 573, KDI 574 Indicators, and KA 60 Antenna.
Guidelines for careful unpacking and visual inspection of the unit for shipping damage and retaining packaging.
Details the procedures for installing the KN 63 DME unit, including mounting, grounding, and clearances.
Provides instructions for mounting the KN 63 DME unit horizontally or vertically, including grounding and clearances.
Instructions for assembling Molex connector terminals, including crimping and insertion into the housing.
Guides for installing KDI 572/574 master and KDI 573 slave indicators, including panel cutout and mounting.
Provides general guidelines and specific instructions for installing the DME antenna, including placement and connections.
Details power-on recommendations, KDI 572/574 switch functions, display information, and audio output adjustment.
To Next Page