N
KRA 405B RADAR ALTIMETER INSTALLATION MANUAL
Page 2-43
006-10536-0010 Rev. 10 Oct/2005
NOTE: Proper operation of a Radar Altimeter System depends upon the
VSWR of the antenna cable. Therefore, extreme care must be ex-
ercised in assembling the TNC connector to the RG 393/U cable.
Strict adherence to the above instructions will ensure a good
VSWR of the antenna cables.
FIGURE 2-13 TNC COAX/CONNECTOR ASSEMBLY (RG 393/U)
(P/N 030-00108-0004)
To Next Page
Loading...
