Honeywell Kromschroder TC 1 User Manual

DK S N P GR
➔ www.docuthek.com
D GB F NL I E
TR CZ PL RUS H
Safety
Please read and keep in a safe place
Please read through these instructions
carefully before installing or operating. Following the
installation, pass the instructions on to the opera-
tor. This unit must be installed and commissioned
in accordance with the regulations and standards
in force. These instructions can also be found at
www.docuthek.com.
Explanation of symbols
• ,  ,  ,  ... = Action
▷ = Instruction
Liability
We will not be held liable for damage resulting from
non-observance of the instructions and non-com-
pliant use.
Safety instructions
Information that is relevant for safety is indicated in
the instructions as follows:
DANGER
Indicates potentially fatal situations.
WARNING
Indicates possible danger to life and limb.
CAUTION
Indicates possible material damage.
All interventions may only be carried out by qualified
gas technicians. Electrical interventions may only be
carried out by qualified electricians.
Conversion, spare parts
All technical changes are prohibited. Only use OEM
spare parts.
Changes to edition 08.7
The following chapters have been changed:
– Installation
– Wiring
– Certification
Contents
Operating instructions
D
GB
F
NL
I
E
GB-1
05469
Translation from the German © 2018 Elster GmbH · Edition 04.18
Tightness control TC , TC , TC 
Tightness control TC , TC , TC .........
Contents ..............................
Safety.................................
Checking the usage .....................
Installation ............................
Mounting TC1V to valVario controls .........3
VAS 6 – 9, VCS 6 – 9 ......................3
Mounting TC1C to combination controlCG ...4
Mounting TC2..........................4
Mounting TC3..........................4
Wiring ................................5
Preparing the wiring ......................5
Connection diagram for TC1, TC2 ..........5
Connection diagram for TC3...............6
Finishing the wiring.......................6
Tightness test ..........................6
Setting the test instant ..................6
Setting measurement time t
M .................7
Commissioning.........................8
Indicators and operating controls............8
Power failure ...........................8
Assistance in the event of malfunction .....8
Replacing the fuse .......................9
Maintenance ...........................9
Technical data ........................0
Safety information in accordance with
EN6508- ...........................0
Logistics .............................
Certification ..........................
Contact ..............................
Safety
Contents

Honeywell Kromschroder TC 1 Specifications

General

Brand	Honeywell
Model	Kromschroder TC 1
Category	Control Unit
Language	English

Summary

Operating Instructions

Safety Guidelines and Warnings

Crucial safety instructions, warnings (Danger, Warning, Caution), liability, and spare parts policy.

Symbols and Edition Updates

Explanation of symbols used in the manual and a summary of changes from the 08.17 edition.

Usage, Types, and Parts Identification

Checking Unit Usage

Description of the tightness control's application and suitability for different gas solenoid valves.

TC Unit Types and Part Designations

Details on TC unit types (1C, 2, 1V, 3) and their specific part designations and components.

Installation Procedures

Type Label and Mounting TC 1V

Information on the unit's type label and step-by-step mounting instructions for TC 1V to valVario controls.

Mounting Specific TC Models

Mounting TC 1C and TC 2

Instructions for installing TC 1C on combination controls CG and TC 2 on solenoid valves.

Mounting TC 3

Detailed guide for mounting the TC 3 unit, including pressure connections.

Wiring and Electrical Connections

Wiring Safety Precautions

Critical safety warnings for electrical work, emphasizing shock hazards and proper grounding procedures.

Wiring Diagrams and Execution

Guides on preparing wiring, including power disconnection, and executing connections using provided diagrams.

Tightness Test Setup

TC 3 Wiring Diagram

Wiring diagram for TC 3, illustrating connections for various mains and control voltage configurations.

Test Instant and Tightness Check

Instructions for setting the test instant (MODE) via DIP switches and performing the tightness test.

Measurement Time Configuration

Setting Measurement Time (tM)

Procedure for adjusting the measurement time (tM) using jumpers for sensitivity and leakage detection.

Volume Data and Calculation Example

Table of valve/pipe volumes and an example calculation for determining optimal measurement time.

Commissioning and Operation

Indicators, Controls, and Status

Overview of unit indicators, operating controls, and LED status messages for monitoring unit status.

Commissioning Steps and Power Failure

Steps for initial unit commissioning and procedures for handling power interruptions during operation.

Malfunction Assistance

Guidance on initial troubleshooting and seeking help for operational malfunctions.

Troubleshooting and Maintenance

Fault Diagnosis and Remedies

Detailed list of faults, their causes, and recommended corrective actions for the TC unit.

Fuse Replacement

Instructions for safely inspecting and replacing fuses F1 and F2 to resolve specific faults.

Technical Data and Safety Information

Electrical, Environmental, and Mechanical Specs

Comprehensive data on electrical, environmental, and mechanical characteristics, including connections.

Designed Lifetime and Safety Standards

Information on the product's designed lifetime and compliance with EN 61508-2 safety standards.

Logistics and Certification

Transport, Storage, and Disposal

Guidelines for product handling during transport, storage, and environmentally responsible disposal.

Declaration of Conformity

Manufacturer's statement confirming the product's adherence to EU directives and relevant standards.

Regulatory Compliance and Safety Values

Approvals and Safety Ratings

Details on regulatory approvals (RoHS, AGA, Customs Union) and safety ratings (SIL, PL).

Characteristic Safety Data

Presents key safety characteristic values like diagnostic coverage and failure probabilities.

Contact Information