5 EN2R-9005 0406R3-NE
FEATURES
• 6.3 mm quick connect terminals for receptacles
• Mounting either in a horizontal or vertical position.
• Housing is provided with two mounting holes which are
suitable for M4 thread forming screws, for mounting on a
control panel.
• Cable entry in the conduit box is suitable for Pg 13.5
conduit or is provided with a plastic grommet (at choice).
• The high and low setpoint stops are field adjustabe with
steps of 2.5°C.
• Capillary available in 350 mm (optional), 1000 mm
(standard), 1500 mm (optional) and 2000 mm (optional)
length.
• Surface mounted Aquastat can be mounted on
cylinders of 300 ... 460 mm diameter as well on pipes
from 40 ... 150 mm diameter.
• Wide range of well assemblies available.
To Next Page
Loading...
Need help?
General
