EN2R-9005 0406R3-NE 10
L6190 SINGLE AQUASTAT - SURFACE MOUNTING
APPLICATION AND ORDERING INFORMATION
Application
The L6190 is a sensitive water temperature thermostat
designed for surface mounting on domestic hot water cylinders
or pipe work. The SPDT switching action is accomplished by a
snap-action microswitch actuated by the temperature sensing
element.
The L6190 is supplied complete with mounting strap for rapid
and easy installation. Draining of the system or tapping of the
cylinder or pipe work is not required. The required temperature
control point is easily set using a screw driver.
Ordering information
O.S. number Application Temperature
range
Switch
differential (K)
Switch type Setting means Strap length
(mm)
L6190A 2016 Surface mounting 25 ... 95°C 8 SPDT External knob 250
L6190B 2006 Surface mounting 25 ... 95°C 8 SPDT External setting 2000
L6190B 2014 Surface mounting 25 ... 95°C 12 SPDT External setting 2000
L6190B 2022 Surface mounting 25 ... 95°C 4 SPDT External setting 2000
L6190B 2030 Surface mounting 25 ... 95°C
4 ... 10
(adjustable)
SPDT Internal setting 250
L6190C 2004 Surface mounting 25 ... 95°C Manual reset SPDT Internal setting 2000
L6190C 2012 Surface mounting 25 ... 95°C Manual reset SPDT Internal setting 2000
To Next Page
Loading...
Need help?
General
