Honeywell LYNX Touch Series User Manual

LYNX Touch Installation and Setup Guide
- 36 -
Programming the Control
SCREEN ACTION
Report Open/Close
Disabled
Select “Open/Close”. The System toggles between “Disabled” and “Enabled”.
Report Tests
Disabled
Select “Report Tests”. The System toggles between “Disabled” and “Enabled”.
Follow Me Phone 2
Select “Follow Me Phone 2” to program the “Follow Me” Reminder telephone number 2.
Phone Type
None
Select “Phone Type”. The System toggles between “None” and “Follow Me”.
Phone Number
Select “Phone Number”. Enter the “Follow Me” Phone Number 2 on the displayed keypad.
Report All
Press to Report All
Select “Report All”. The System toggles between “Press to Report All” and “Report All Set”.
If “Report All” is selected all reporting options will be “Enabled”. Select the “Save” key to
return to the Reporter options screen.
Report Alarms
Ensabled
Select “Report Alarms”. The System toggles between “Disabled” and “Enabled”.
Report Troubles
Ensabled
Select “Report Troubles”. The System toggles between “Disabled” and “Enabled”.
Report Open/Close
Disabled
Select “Open/Close”. The System toggles between “Disabled” and “Enabled”.
Report Tests
Enabled
Select “Report Tests”. The System toggles between “Disabled” and “Enabled”.
Report Selection
Select “Report Selection”. The System displays the following options:
Arm Away Arm Stay
Disarm Exit Error
Recent Closing Event Log Full
Trouble Trouble Restore
Use the down T arrow to scroll to the next page of options.
Alarm Restore Alarm Cancel
Test Test Restore
Bypass Bypass Restore
AC Loss AC Loss Restore
Use the down T arrow to scroll to the next page of options.
Low Battery Low Battery Restore
RF Low Battery RF Low Battery Restore
Arm Away
Enabled
Select “Arm Away”. The System toggles between “Disabled” and “Enabled”.
Arm Stay
Enabled
Select “Arm Stay”. The System toggles between “Disabled” and “Enabled”.
Disarm
Enabled
Select “Disarm”. The System toggles between “Disabled” and “Enabled”.
Exit Error
Enabled
Select “Exit Error”. The System toggles between “Disabled” and “Enabled”.
SIA: The LYNX Touch default is “Enabled” and is not selectable.
Recent Closing
Enabled
Select “Recent Closing”. The System toggles between “Disabled” and “Enabled”.
SIA: The LYNX Touch default is “Enabled” and is not selectable.
Event Log Full
Enabled
Select “Event Log Full”. The System toggles between “Disabled” and “Enabled”.

Honeywell LYNX Touch Series Specifications

General

Zones	Up to 64 wireless zones
Integrated Camera	No
Voice Prompts	Yes
Encryption	Yes
Communication	Wi-Fi, Cellular
Backup Battery	Yes
Alarm Notifications	Yes
Siren	Built-in siren
Remote Access	Yes
Display	Color touchscreen