EasyManua.ls Logo

Honeywell MB-Secure 3000 User Manual

Honeywell MB-Secure 3000
48 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Installation Instructions
P00180-02-0G0-09
EMBSC.00.0V05.xx
Subject to change
without notice
2017-05-22
Control panel
MB-Secure 1000/2000/3000/4000/5000/6000

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Honeywell MB-Secure 3000 and is the answer not in the manual?

Honeywell MB-Secure 3000 Specifications

General IconGeneral
BrandHoneywell
ModelMB-Secure 3000
CategoryControl Panel
LanguageEnglish

Summary

Safety Instructions

Control Panel Configuration Options

Control Panel Design

Computer/Connection PCB

Directly Connectible Readers

List of compatible reader types for direct connection to Modulbus/RS-485.

Extension Modules

AWUG DS 6700 / DS 6750 Transmission Device

Details on the AWUG DS 6700/DS 6750 automatic transmission device.

AWUG DS 7700 Transmission Device

Details on the AWUG DS 7700 automatic transmission device.

Installation Procedures

Mounting the Control Panel

Guidelines for selecting the installation location and mounting the control panel.

Power Supply Requirements

Details on mains connection, fuses, and battery requirements for the power supply.

Component Current Consumption

Accumulator Capacity Calculation

Multiple Power Supply Units

Grounding and Shielding

Cabling and Lines

BUS Line Requirements

Details on functions, cable types, and interference factors for BUS lines.

BUS-2 Installation Guidelines

Framework conditions for installing BUS-2 cables, including cable type and length.

BUS-2 User Connections

IB2/Modulbus/RS-485 User Connections

Sample Cable Calculation for Users

Cross-Section/Wire Number Diagram

Installation and Planning Notes

IB2 Main Zone Extension

Start-Up Procedure

Preparations for Start-Up

Ensuring system status and operator access before initiating start-up.

Programming BUS Users

Procedure for programming BUS users via PC/laptop and network connection.

Initial Start-Up Steps

Steps for initial electrical operation, including checks and LED status.

Maintenance Guidelines

Firmware Updates

Technical Specifications

Connection Diagrams

Alarm Detector Z-Wiring

General wiring diagrams for Z-contacts and Z-Sensors using Z-wiring.

IDENT-KEY IK3 Evaluation Unit Connection

Diagram and notes for connecting the IDENT-KEY IK3 evaluation unit.

Electromechanical Blocking Element Connection

Diagram for connecting electromechanical blocking elements with actuation and output details.

DS 6700/DS 6750 Connection Diagram

Diagram showing connections for the DS 6700/DS 6750 transmission device.

DS 7700 Connection Diagram

Diagram showing connections for the DS 7700 transmission device.

Computer/Connection PCB Diagram

Diagram detailing connections for the Computer/Connection PCB to peripherals and power.

Protective Earthing for Power Supply

Procedure for establishing protective earth connection for metal-housed power supply units.

Related product manuals